Utilization of waste beverages for achieving carbon-based core-shell nanostructures of high visible light photocatalytic performance.

Waste beverages are utilized as resources in various valuable, albeit energy-consuming, waste-to-energy processes. There is a growing need for alternative cost-effective methods to harness their potential. This study explored the feasibility of employing waste beverages as feedstock for the counterpart component of a TiO2-based composite photocatalyst. Several commonly available carbonated soft drinks from the Japanese market have been investigated to achieve this goal. The investigation revealed that a mild hydrothermal treatment condition could transform all examined beverages into carbonaceous materials suitable for fabricating a core-shell structure with TiO2, resulting in a remarkably efficient visible light active photocatalyst. Notably, a pH-adjusted photocatalyst derived from Coca Cola® exhibited superior visible light photodegradability toward dye molecules and enhanced bactericidal efficacy compared to the counterpart derived from pure sucrose. The heightened visible light photocatalytic activity can be attributed to the distinctive carboxy-rich surface functional groups, based on the findings of experimental analyses and density functional theory calculations. The bidentate-type bonding of these groups with TiO2 induces a modified interfacial bond structure that facilitates the efficient transfer of photoexcited carriers. This study presents a novel avenue for the effective utilization and recycling of waste beverages, and adds value under environmentally benign conditions.

Feeble Single-Atom Pd Catalysts for H2 Production from Formic Acid.

Single-atom catalysts are thought to be the pinnacle of catalysis. However, for many reactions, their suitability has yet to be unequivocally proven. Here, we demonstrate why single Pd atoms (PdSA) are not catalytically ideal for generating H2 from formic acid as a H2 carrier. We loaded PdSA on three silica substrates, mesoporous silicas functionalized with thiol, amine, and dithiocarbamate functional groups. The Pd catalytic activity on amino-functionalized silica (SiO2-NH2/PdSA) was far higher than that of the thiol-based catalysts (SiO2-S-PdSA and SiO2-NHCS2-PdSA), while the single-atom stability of SiO2-NH2/PdSA against aggregation after the first catalytic cycle was the weakest. In this case, Pd aggregation boosted the reaction yield. Our experiments and calculations demonstrate that PdSA in SiO2-NH2/PdSA loosely binds with amine groups. This leads to a limited charge transfer from Pd to the amine groups and causes high aggregability and catalytic activity. According to the density functional calculations, the loose binding between Pd and N causes most of Pd's 4d electrons in amino-functionalized SiO2 to remain close to the Fermi level and labile for catalysis. However, PdSA chemically binds to the thiol group, resulting in strong hybridization between Pd and S, pulling Pd's 4d states deeper into the conduction band and away from the Fermi level. Consequently, fewer 4d electrons were available for catalysis.

Mechanism of NH3-SCR over P/CeO2 Catalysts Investigated by Operando Spectroscopies.

This study reports a comprehensive investigation into the active sites and reaction mechanism for the selective catalytic reduction of NO by NH3 (NH3-SCR) over phosphate-loaded ceria (P/CeO2). Catalyst characterization and density functional theory calculations reveal that H3PO4 and H2P2O6 species are the dominant phosphate species on the P/CeO2 catalysts under the experimental conditions. The reduction/oxidation half-cycles (RHC/OHC) were investigated using in situ X-ray absorption near-edge structure for Ce L3-edge, ultraviolet-visible, and infrared (IR) spectroscopies together with online analysis of outlet products (operando spectroscopy). The Ce4+(OH-) species, possibly adjacent to the phosphate species, are reduced by NO + NH3 to produce N2, H2O, and Ce3+ species (RHC). The Ce3+ species is reoxidized by aqueous O2 (OHC). The results from IR spectroscopy suggest that the RHC initiates with the reaction between NO and Ce4+(OH-) to yield Ce3+ and gaseous HONO, which then react with NH3 to produce N2 and H2O via NH4NO2 intermediates.

Accelerated discovery of multi-elemental reverse water-gas shift catalysts using extrapolative machine learning approach.

Designing novel catalysts is key to solving many energy and environmental challenges. Despite the promise that data science approaches, including machine learning (ML), can accelerate the development of catalysts, truly novel catalysts have rarely been discovered through ML approaches because of one of its most common limitations and criticisms-the assumed inability to extrapolate and identify extraordinary materials. Herein, we demonstrate an extrapolative ML approach to develop new multi-elemental reverse water-gas shift catalysts. Using 45 catalysts as the initial data points and performing 44 cycles of the closed loop discovery system (ML prediction + experiment), we experimentally tested a total of 300 catalysts and identified more than 100 catalysts with superior activity compared to those of the previously reported high-performance catalysts. The composition of the optimal catalyst discovered was Pt(3)/Rb(1)-Ba(1)-Mo(0.6)-Nb(0.2)/TiO2. Notably, niobium (Nb) was not included in the original dataset, and the catalyst composition identified was not predictable even by human experts.

Bifunctionality of Re Supported on TiO2 in Driving Methanol Formation in Low-Temperature CO2 Hydrogenation.

Low temperature and high pressure are thermodynamically more favorable conditions to achieve high conversion and high methanol selectivity in CO2 hydrogenation. However, low-temperature activity is generally very poor due to the sluggish kinetics, and thus, designing highly selective catalysts active below 200 °C is a great challenge in CO2-to-methanol conversion. Recently, Re/TiO2 has been reported as a promising catalyst. We show that Re/TiO2 is indeed more active in continuous and high-pressure (56 and 331 bar) operations at 125-200 °C compared to an industrial Cu/ZnO/Al2O3 catalyst, which suffers from the formation of methyl formate and its decomposition to carbon monoxide. At lower temperatures, precise understanding and control over the active surface intermediates are crucial to boosting conversion kinetics. This work aims at elucidating the nature of active sites and active species by means of in situ/operando X-ray absorption spectroscopy, Raman spectroscopy, ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Transient operando DRIFTS studies uncover the activation of CO2 to form active formate intermediates leading to methanol formation and also active rhenium carbonyl intermediates leading to methane over cationic Re single atoms characterized by rhenium tricarbonyl complexes. The transient techniques enable us to differentiate the active species from the spectator one on TiO2 support, such as less reactive formate originating from spillover and methoxy from methanol adsorption. The AP-XPS supports the fact that metallic Re species act as H2 activators, leading to H-spillover and importantly to hydrogenation of the active formate intermediate present over cationic Re species. The origin of the unique reactivity of Re/TiO2 was suggested as the coexistence of cationic highly dispersed Re including single atoms, driving the formation of monodentate formate, and metallic Re clusters in the vicinity, activating the hydrogenation of the formate to methanol.

The reducibility and oxidation states of oxide-supported rhenium: experimental and theoretical investigations.

The activity and stability of supported metal catalysts, which exhibit high efficiency and activity, are significantly influenced by the interactions between the metal and the support, that is, metal-support interactions (MSIs). Here, we report an investigation of the MSIs between supported rhenium (Re) and oxide supports such as TiO2, SiO2, Al2O3, MgO, V2O5, and ZrO2 using experimental and computational approaches. The reducibility of the Re species was found to strongly depend on the oxide support. Experimental studies including temperature-programmed reduction by H2 as well as Re L3- and L1-edge X-ray absorption near edge structure (XANES) analysis revealed that the valency of the Re species started to decrease upon H2 reduction in the 200-400 °C range, except for Re on MgO, where the shift occurred at temperatures above 500 °C. The dependence of the Re L3- and L1-edge XANES spectra of the oxide-supported Re catalysts on the size of Re was also examined.

Correction to "Trends in Surface Oxygen Formation Energy in Perovskite Oxides".

[This corrects the article DOI: 10.1021/acsomega.2c00702.].

Trends in Surface Oxygen Formation Energy in Perovskite Oxides.

Perovskite oxides comprise an important class of materials, and some of their applications depend on the surface reactivity characteristics. We calculated, using density functional theory, the surface O vacancy formation energy (E Ovac) for perovskite-structure oxides, with a transition metal (Ti-Fe) as the B-site cation, to estimate the catalytic reactivity of perovskite oxides. The E Ovac value correlated well with the band gap and bulk formation energy, which is a trend also found in other oxides. A low E Ovac value, which is expected to result in higher catalytic activity via the Mars-van Krevelen mechanism, was found in metallic perovskites such as CaCoO3, BaFeO3, and SrFeO3. On the other hand, titanates had high E Ovac values, typically exceeding 4 eV/atom, suggesting that these materials are less reactive when O vacancy formation is involved in the reaction mechanism.

Factors determining surface oxygen vacancy formation energy in ternary spinel structure oxides with zinc.

Spinel oxides are an important class of materials for heterogeneous catalysis including photocatalysis and electrocatalysis. The surface O vacancy formation energy (EOvac) is a critical quantity for catalyst performance because the surface of metal oxide catalysts often acts as a reaction site, for example, in the Mars-van Krevelen mechanism. However, experimental evaluation of EOvac is very challenging. We obtained the EOvac for (100), (110), and (111) surfaces of normal zinc-based spinel oxides ZnAl2O4, ZnGa2O4, ZnIn2O4, ZnV2O4, ZnCr2O4, ZnMn2O4, ZnFe2O4, and ZnCo2O4. The most stable surface is (100) for all compounds. The smallest EOvac for a surface is the largest in the (100) surface except for ZnCo2O4. For (100) and (110) surfaces, there is a good correlation, over all spinels, between the smallest EOvac for the surface and bulk formation energy, while the ionization potential correlates well in (111) surfaces. Machine learning over EOvac of all surface sites in all orientations and for all compounds to find the important factors, or descriptors, that decide the EOvac revealed that bulk and surface-dependent descriptors are the most important, namely the bulk formation energy, a Boolean descriptor of whether the surface is (111) or not, and the ionization potential, followed by geometrical descriptors that are different in each O site.

Surface activation by electron scavenger metal nanorod adsorption on TiH2, TiC, TiN, and Ti2O3.

Metal/oxide support perimeter sites are known to provide unique properties because the nearby metal changes the local environment on the support surface. In particular, the electron scavenger effect reduces the energy necessary for surface anion desorption, and thereby contributes to activation of the (reverse) Mars-van Krevelen mechanism. This study investigated the possibility of such activation in hydrides, carbides, nitrides, and sulfides. The work functions (WFs) of known hydrides, carbides, nitrides, oxides, and sulfides with group 3, 4, or 5 cations (Sc, Y, La, Ti, Zr, Hf, V, Nb, and Ta) were calculated. The WFs of most hydrides, carbides, and nitrides are smaller than the WF of Ag, implying that the electron scavenger effect may occur when late transition metal nanoparticles are adsorbed on the surface. The WF of oxides and sulfides decreases when reduced. The surface anion vacancy formation energy correlates well with the bulk formation energy in carbides and nitrides, while almost no correlation is found in hydrides because of the small range of surface hydrogen vacancy formation energy values. The electron scavenger effect is explicitly observed in nanorods adsorbed on TiH2 and Ti2O3; the surface vacancy formation energy decreases at anion sites near the nanorod, and charge transfer to the nanorod happens when an anion is removed at such sites. Activation of hydrides, carbides, and nitrides by nanorod adsorption and screening support materials through WF calculation are expected to open up a new category of supported catalysts.

Non-oxidative Coupling of Methane: N-type Doping of Niobium Single Atoms in TiO2 -SiO2 Induces Electron Localization.

Photodriven nonoxidative coupling of CH4 (NOCM) is an attractive potential way to use abundant methane resources. Herein, an n-type doped photocatalyst for NOCM is created by doping single-atom Nb into hierarchical porous TiO2 -SiO2 (TS) microarray, which exhibits a high conversion rate of 3.57 µmol g-1 h-1 with good recyclability. The Nb dopant replaces the 6-coordinated titanium on the (1 0 1) plane and forms shallow electron-trapped surface polarons along [0 1 0] direction and the comparison of different models proves that the electron localization caused by the n-type doping is beneficial to both methane activation and ethane desorption. The positive effect of n-type dopant on CH4 conversion is further verified on Mo-, W- and Ta-doped composites. In contrast, the doping of p-type dopant (Ga, Cu, Fe) shows a less active influence.

Defects on CoS2-x : Tuning Redox Reactions for Sustainable Degradation of Organic Pollutants.

It is important to develop self-producing reactive oxygen species (ROSs) systems and maintain the continuous and effective degradation of organic pollutants. Herein, for the first time, a system of ultrasound-treated CoS2-x mixed with Fe2+ is constructed to sustainably release singlet oxygen (1 O2 ) for the effective degradation of various organic pollutants, including dyes, phenols, and antibiotics. Ultrasonic treatment produces defects on the surface of CoS2 which promote the production of ROSs and the circulation of Fe3+ /Fe2+ . With the help of Co4+ /Co3+ exposed on the surface of CoS2-x , the directional conversion of superoxide radical (. O2- ) to 1 O2 is realized. The CoS2-x /Fe2+ system can degrade organic pollutants efficiently for up to 30 days, which is significantly better than the currently recognized CuPx system (<3 days). Therefore, CoS2-x provides a new choice for the long-term remediation of organic pollutants in controlling large area river pollution.

Designing 3D-MoS2 Sponge as Excellent Cocatalysts in Advanced Oxidation Processes for Pollutant Control.

3D-MoS2 can adsorb organic molecules and provide multidimensional electron transport pathways, implying a potential application for environment remediation. Here, we study the degradation of aromatic organics in advanced oxidation processes (AOPs) by a 3D-MoS2 sponge loaded with MoS2 nanospheres and graphene oxide (GO). Exposed Mo4+ active sites on 3D-MoS2 can significantly improve the concentration and stability of Fe2+ in AOPs and keep the Fe3+ /Fe2+ in a stable dynamic cycle, thus effectively promoting the activation of H2 O2 /peroxymonosulfate (PMS). The degradation rate of organic pollutants in the 3D-MoS2 system is about 50 times higher than without cocatalyst. After a 140 L pilot-scale experiment, it still maintains high efficiency and stable AOPs activity. After 16 days of continuous reaction, the 3D-MoS2 achieves a degradation rate of 120 mg L-1 antibiotic wastewater up to 97.87 %. The operating cost of treating a ton of wastewater is only US$ 0.33, suggesting huge industrial applications.

Efficient photocatalytic degradation of organics present in gas and liquid phases using Pt-TiO2/Zeolite (H-ZSM).

TiO2-encapsulated H-ZSM photocatalysts were prepared by physical mixing of TiO2 and zeolites. Pt was immobilized on the surface of the TiO2-encapsulated zeolite (H-ZSM) catalysts by a simple photochemical reduction method. Different weight ratios of both TiO2 and Pt were hybridized with H-ZSM and the catalytic performance of the prepared catalysts was investigated for 2-propanol oxidation in liquid phase and acetaldehyde in gas phase reaction. Around 5-10 wt% TiO2-encapsulated H-ZSM catalysts was found to be optimal amount for the effective oxidation of the organics. Prior to light irradiation, Pt-TiO2-H-ZSM showed considerable amount of catalytic degradation of 2-propanol in the dark, forming acetone as an intermediate. In this study, Pt has played a major and important role on the total oxidation of 2-propanol as well as acetaldehyde. As a result, no residual organics were present in the pores of the zeolites. The catalysts could be reused more than three times without losing their catalytic activity in both phases. The Pt-TiO2-H-ZSM photocatalysts could overcome the problem of strong adsorption of organics in the zeolite pores (after the reaction). Thus, Pt-TiO2-H-ZSM can be used as a potential catalyst for both liquid and gas phase oxidation of organic pollutants.